PROMACO, UNIVERSAL (SEE NXT PG, 4 VERSIONS AVAILABLE), MODEL#RBM 2-30 **NEW**
Specific Info On This Equipment
Reference Number: 870
Condition: New
"If you need a machine and don't buy it, then you will ultimately find you have paid for it but don't have it." Henry Ford
Full Product Description
Model: PROMACO RBM-230 MATERIAL: DIMENSIONS: MIN. I.D.: REQUIRED TOOLING: Flats, Hard: 3/4" X 1/4" 14" Standard Rolls Flats, Hard: 2" X 3/8" 16" Standard Flats, Hard: 2-1/2" X 1/4" 30" Standard Flats, Easy: 3" X 5/8" 14" Standard Flats, Easy: 5" X 3/8" 13" Special Square Bar: 1-1/8" 24" Standard Square Bar: 1/2" 3" Special Angle, Legout: 1" X 1" X 1/4" 17" Standard Angle, Legout: 1.5" X 1.5" X 3/16" 16" Special Angle, Legin: 1" X 1" X 1/4" 20" Standard Angle, Legin: 1.5" X 1.5" X 3/16" 21" Special Tee, Legout: 1.5" X 1.5" X 1/4" 12" Standard Tee, Legin: 1.5" X 1.5" X 1/4" 20" Standard C, Legout: 2" X 1" X 3/16" 12" Standard Round Bar: 1-1/4" 24" Special Pipe, SCH 40: 1" Sched 40 Pipe 12" Special Pipe, SCH 40: 1.5" Sched 40 Pipe 18" Special Round Tube: 3/4" X 16 Gauge Tube 12" Special Round Tube: 2-3/8" X 16 ga Tube 48" Special Square Tube: 1" X 1" X 11 Gauge 25" Standard Square Tube: 1.5" X 1.5" X 11 ga. 40" Special Rect. Tube: 2" X 1" X 11 Gauge 48" Special SPECIFICATIONS: Electric Motor Rating (0.75 KW): 1 HP Power Requirement 220 Volt, 3 PH: 3.7 AMPS Power Requirement 440 Volt, 3 PH: 1.8 AMPS Power Requirement 220 Volt, 1 PH: 5.9 AMPS Shaft Diameter: 30MM Shaftspeed: 6.5RPM Number of Driven Shafts: 2 Number of Adjustable (Or Form) Rolls: 1 Width: 26 Inches Depth: 22 Inches Overall Height: 51 Inches Approximate Pass Line: 40 Inches Net Weight: 350 lbs. Gross (Shipping) Weight: 500 lbs. FEATURES: * Rugged Steel Frame. * Bi-Directional Drive Motor 220 Volt, 3 PH -10:1 Gear Reduction Unit, Operating in Constant Oil Bath. * High Strength Steel Shafts, Powered By A Spur Gear Drive. * Forming Roll Guide Block Traveling on Hardened Slide Ways. * Roll Shafts Journaled Tapered Roller Bearings, Greased & Sealed For Life * Two Adjustment Scales For The Depth Adjustment of The Forming Roll. * Two Laterally Mounted, Adjustable Guide Rollers. * Main Power on/off Switch and Three Position Selector Switch For Directional Control of The Electric Motor. * Set of Shims For clearance Adjustment of The Standard Rolls. * 18 Piece Standard Roll Set is Included. * Machine STand Is Included, With Generous Tooling Storage Space. The RBM 2-30 is suitable for rolling a wide variety of materials, including structural and stainless steels, as well as, copper, aluminum and brass. The machine is furnished with a standard or "Universal" Roll set, consisting of eighteen roll discs. Each of the machine's three shafts is equipped with two large discs and four smaller spacer discs, of varying thickness (18 Pieces in all). This system allows the machine operator to "Construct" the dies that are required to roll many shapes and sizes of materials, according to the sequence in which the discs are installed on the roll shafts. Therefore, the need for special tooling is eliminated on rolling applications such as, flat bar, square bar, channels, tees, box tubing and most angles. Round mechanical tubing and schedule 40 pipe may also be rolled, however, these applications require optional tooling where the dies conform to the O.D. of the material being rolled. Custom roll sets, for extruded shapes or molded caps, are also available upon request. For the rolling of molded cap rails, promaco offers special die sets. These sets consist of two components. The first is a Delrin "Insert", which actually comes in contact with the molded cap. Delrin is a hard, durable synthetic, which resists material pick-up and, thereby, prevents the cap rail from being marred during the rolling process. The Delrin inserts are machined to the exact shape of the molded cap rail that each customer is using. Popular caps such as the Blum 4530 or Braun 1244 S are usually available from stock. Other styles can be delivered within ten working days. Tubing in the shape of molded cap rail may also be rolled with this tooling. The second component of the cap rail die set is the steel support disc. Support discs are employed to "Sandwich" the Delrin inserts to prevent their edges from fracturing due to side loading during the rolling process. These discs may also be used for rolling 12" box and 2" X 1" rectangular tubes. Although we recommend that inserts conform to the shape of the specific rail being rolled, the support discs may be used with any set of inserts.