Full Product Description
MODEL: SERIES 1
Table Size: 9" x 49"
Table Height Above Floor (max): 47.25"
Table Load: 750lbs.
No. of T-slots: 3
T-slot Width: 5/8"
T-slot Center Distance: 2.5"
Table Ways: Dovetail
Knee Ways: Dovetail
Column Ways: Dovetail
X Longitudinal Table (w/o pwr feed): 36"
X Longitudinal Table (w/pwr feed): 33"
Y Cross: 12"
Knee: 16"
Ram: 12"
Throat Distance (min): 6.75"
Throat Distance (max): 18.75"
Table to Nose Gauge Line (min/max): 2.5" / 18.25"
Spindle Motor (duty cycle/continuous): 3 Hp / 2Hp
Amp. Draw 208v.: 7
Amp. Draw 230v.: 7
Amp. Draw 460v.: 5
Speed Range High Range: 500-4200 RPM
Speed Range Low Range: 60-500 RPM
Main Spindle Taper: R8
Spindle Travel: 5"
Quill Feed (in/rev.): .0015/.003/.006
Quill Diameter: 3.375"
Power Quill Feed: 3/8"
Milling Capacity (mild steel): 2 CI/in
Boring Range (mild steel): 6" dia
Spindle Diameter: 1.875"
Feed Rate Range (X,Y): 0.50-35 ipm
Minimum Increment: 0.0001"
Floor Area: 7 x 10 ft
Height: 87"
Net Weight: 1930 lbs
Shipping Weight: 2075 lbs
Input Power: 208/230/240 Volt, 3 Phase 50/60hz
STANDARD EQUIPMENT:
Mechanical Variable Speed Drive System
Patented 2J Head gives unique air cooling for spindle
bearings
Hardened & Scraped, X, Y & Z Ways
Scraped gibs for alignment
T-slots are ground to provide reference edge for positioning
your workplace
Hardened & Scraped Table Surface
Hardened & Ground Spindle
Chromed & Ground Quill
Chromed X, Y, & Z Leadscrews
Double Nut Leadscrew for backlash compensation
ABEC 7/CP4 Spindle Bearings
One-piece way wipers
7/16"-20 Imperial Drawbar R8
3 / 2 Hp AC Motor (3Hp 30 minute duty/ 2Hp continuous)
Articulating Head for Compound Angles
Worm gear angular positioning of head in two directions
Lever-operated manual rapid quill movement
Handwheel for fine quill feed
Adjustable automatic feed disengagement for quill feed in
both directions
Micrometer depth stop
Reversing switch for clockwise or counter clockwise
operation
R8 Spindle taper
Spindle Brake (Hand operated)
One-shot lubrication
Leveling bolts and pads (in tool box)
Tool Kit, Test and Accuracy Chart
Operations Manual/Parts List
Series 1 Standard 208/230 or 460 3 Phase (other voltages
require a transformer)
CONTACT US FOR PRICING/INFO ON ALL THE OPTIONALS
AVAILABLE (POWERFEED, DRO'S, RISES, AIR DRAWBAR, ETC....
BRIDGEPORT SERIES-1 MACHINES ARE MADE IN THE U.S.A.!!
